MAX16004BTP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.355W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX16004 |
| Output | Open Drain or Open Collector |
| Pin Count | 20 |
| Power Supplies | 2.5/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 6 Selectable Threshold Combinations |
| Number of Voltages Monitored | 6 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.07mA |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 3.135V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16004BTP+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 20 in total. A Tube package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. There are 6 channels available on this supervisor, and each channel has a different function. There are 20-WFQFN Exposed Pad functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 6 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 20. 20 pins are present on the power management system. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~125°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. There is a supply current of 50μA for the power management. There are other features such as MANUAL RESET INPUT to name a few. To find similar IC managements from the manufacturer, you can always search by MAX16004. In order to operate this power management, it requires 2.5/5V volts of power.
MAX16004BTP+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16004BTP+ Applications
There are a lot of Maxim Integrated MAX16004BTP+ Voltage Supervisors applications.
- Power distribution systems of infant care room
- DSP
- Multi-voltage system
- Sensitive sensors
- Dash board
- Efficient information transmission
- Insulation fault location system
- Urban rail transit weak current power monitoring
- Telecommunications equipment
- Battery-powered equipment
