MAX16004BTP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.355W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX16004 |
| Output | Open Drain or Open Collector |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 6 Selectable Threshold Combinations |
| Number of Voltages Monitored | 6 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.07mA |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 3.135V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16004BTP+T Overview
There are 20 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 6 channels. In this PMIC, you can find 20-WFQFN Exposed Pad functions for your reference. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. There is a specification for the peak reflow temperature of the package to be NOT SPECIFIED. A supply voltage of 3.3V is used to conduct the PMIC chip. A supply voltage of 6 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 20 pins. There are 20 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supervisor's supply current is specified to 50μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX16004, which is the base power ics number. In order to operate this power management, it requires 2.5/5V volts of power.
MAX16004BTP+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16004BTP+T Applications
There are a lot of Maxim Integrated MAX16004BTP+T Voltage Supervisors applications.
- Power distribution systems of CCU
- Power distribution systems of infant care room
- Microprocessor system
- Insulation fault location system
- Sensitive sensors
- Data storage applications
- Electronics installed in the vehicle
- Smartphones
- Analog circuit
- Detection of phase sequence
