MAX16004CTP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.355W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX16004 |
| Output | Open Drain or Open Collector |
| Pin Count | 20 |
| Power Supplies | 2.5/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 6 Selectable Threshold Combinations |
| Number of Voltages Monitored | 6 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.07mA |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 3.135V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16004CTP+ Overview
There are 20 terminals on this power management that allow it to be mounted. It is packaged with Tube. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 6 channels, each of which can be used independently. In this IC management you will find 20-WFQFN Exposed Pad functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 3.3V. When a supply voltage of 6 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 20 pins that are attached to IC management. The pins of the power management system count 20. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a supply current of 50μA for the power management. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few. You can always use MAX16004, the base supervisor number, to search for similar PMICs of the manufacturer. It requires 2.5/5V watts of power to operate this voltage supervisor.
MAX16004CTP+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16004CTP+ Applications
There are a lot of Maxim Integrated MAX16004CTP+ Voltage Supervisors applications.
- Magnetic resonance imaging
- Display equipment
- Electronics installed in the vehicle
- Cloud computing
- Network equipment
- Detection of phase sequence
- Radio
- Power distribution systems of operating room
- Utility meter
- Radar
