Parameters |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
MAX16005 |
Output |
Open Drain or Open Collector |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
6 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
50μA |
Adjustable Threshold |
YES |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
6 Selectable Threshold Combinations |
Number of Voltages Monitored |
6 |
Reset Timeout |
Adjustable/Selectable |
Supply Current-Max (Isup) |
0.07mA |
Undervoltage Threshold |
2.25V |
Overvoltage Threshold |
3.135V |
Height Seated (Max) |
0.8mm |
Length |
4mm |
Width |
4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-WQFN Exposed Pad |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
MANUAL RESET INPUT |
HTS Code |
8542.39.00.01 |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
1.349W |
Technology |
BICMOS |
MAX16005CTE+T Overview
This power management consists of 16 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 6 channels. As a reference, this IC power includes 16-WQFN Exposed Pad functions for your convenience. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be NOT SPECIFIED. The supervisor is always powered by a 3.3V volt supply. There is a voltage supply of 6 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 16. 16 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 50μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. For similar manage ics search of the manufacturer, you can always refer to MAX16005, the base PMIC number.
MAX16005CTE+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16005CTE+T Applications
There are a lot of Maxim Integrated MAX16005CTE+T Voltage Supervisors applications.
- emergency room
- Electronics installed in the vehicle
- Solar power charger
- Battery-powered equipment
- DC stabilized power supply module
- Military electronics
- Detection of phase loss
- DVR
- Microprocessor system
- Stable power system