MAX16016LTBR+T
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.63 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.951W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.62V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX16016 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 145ms Minimum |
| Supply Current-Max (Isup) | 0.005mA |
| Min Reset Threshold Voltage | 2.549V |
| Max Reset Threshold Voltage | 2.755V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
MAX16016LTBR+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 10 in total. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a 10-WFDFN Exposed Pad package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT SPECIFIED. Manage ics operate at 1.62V supply voltages. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. This power ic can be sub-categorized as Power Management Circuits. It has a total of 10 pins that are attached to IC management. This power management has 10 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 2.63 to name a few. It is always advisable to use MAX16016, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX16016LTBR+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
MAX16016LTBR+T Applications
There are a lot of Maxim Integrated MAX16016LTBR+T Voltage Supervisors applications.
- Insulation fault location system
- Power distribution systems of ICU
- Battery cars
- Battery-powered equipment
- Military electronics
- Microcontroller system
- WiFi router
- Leakage current detection
- DC stabilized power supply module
- Battery cars
