MAX16021LTES+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX16021 |
| Output | Push-Pull, Totem Pole |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.946V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 145ms Minimum |
| Supply Current-Max (Isup) | 0.005mA |
| Min Reset Threshold Voltage | 2.862V |
| Max Reset Threshold Voltage | 3.034V |
| Undervoltage Threshold | 2.862V |
| Overvoltage Threshold | 3.034V |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX16021LTES+ Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tube-packaging method applied to IC management. For your reference, this PMIC includes a list of 16-WQFN Exposed Pad functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 225 for the package during reflow. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Pin count of the power management is 16. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. There is a supply current of 1.2μA for the power management. You can always use MAX16021, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX16021LTES+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
1.2μA operating supply current
MAX16021LTES+ Applications
There are a lot of Maxim Integrated MAX16021LTES+ Voltage Supervisors applications.
- Efficient information transmission
- Smartphones
- Medical-specific insulation monitor
- Insulation fault location system
- Rechargeable batteries
- Telecommunications equipment
- Network equipment
- Military communications
- Military electronics
- Power distribution systems of operating room
