MAX16021LTET+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX16021 |
| Output | Push-Pull, Totem Pole |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.53V |
| Operating Supply Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.1V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 145ms Minimum |
| Supply Current-Max (Isup) | 0.005mA |
| Min Reset Threshold Voltage | 3.01V |
| Max Reset Threshold Voltage | 3.19V |
| Undervoltage Threshold | 3.01V |
| Overvoltage Threshold | 3.19V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX16021LTET+ Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tray model. In this IC management you will find 16-WQFN Exposed Pad functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 225. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power managment ic pin count is 16. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.53V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 1.2μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to MAX16021, the base PMIC number.
MAX16021LTET+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.53V
1.2μA operating supply current
MAX16021LTET+ Applications
There are a lot of Maxim Integrated MAX16021LTET+ Voltage Supervisors applications.
- Radio
- Smartphones
- Microprocessor system
- Leakage protection
- Leakage current detection
- Dash board
- Insulation fault location system
- Important electronics for automotive safety
- Power distribution systems of infant care room
- DSP
