MAX16021LTEZ+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX16021 |
| Output | Push-Pull, Totem Pole |
| Qualification Status | Not Qualified |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.53V |
| Operating Supply Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.323V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 145ms Minimum |
| Supply Current-Max (Isup) | 0.005mA |
| Min Reset Threshold Voltage | 2.26V |
| Max Reset Threshold Voltage | 2.39V |
| Undervoltage Threshold | 2.26V |
| Overvoltage Threshold | 2.39V |
| RoHS Status | ROHS3 Compliant |
MAX16021LTEZ+ Overview
A total of 16 terminals are used to mount this power management. Packaging is in the form of a Tube. The purpose of this IC power is to provide you with a reference of 16-WQFN Exposed Pad functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 225. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. 16 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.53V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supply current of the power management is 1.2μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX16021, which is the base power ics number.
MAX16021LTEZ+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.53V
1.2μA operating supply current
MAX16021LTEZ+ Applications
There are a lot of Maxim Integrated MAX16021LTEZ+ Voltage Supervisors applications.
- Power distribution systems of CCU
- Multi-voltage system
- Telecommunications equipment
- Medical-specific insulation monitor
- Leakage protection
- WiFi router
- Digitally controlled LDO regulators circuit
- Microprocessor system
- Consumer electronics
- Kitchen appliances
