MAX16021PTEW+
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 225 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX16021 |
| Output | Open Drain or Open Collector |
| Qualification Status | Not Qualified |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.53V |
| Operating Supply Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 1.661V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 145ms Minimum |
| Supply Current-Max (Isup) | 0.005mA |
| Min Reset Threshold Voltage | 1.616V |
| Max Reset Threshold Voltage | 1.71V |
| Undervoltage Threshold | 1.616V |
| Overvoltage Threshold | 1.71V |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
MAX16021PTEW+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. Packaged in a Tube-shape, IC management comes with a number of features. Please refer to power management for 16-WQFN Exposed Pad functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 225 for the package during reflow. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. Power managment ic pin count is 16. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.53V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. It is estimated that the voltage supervisor's supply current is 1.2μA. For similar manage ics search of the manufacturer, you can always refer to MAX16021, the base PMIC number.
MAX16021PTEW+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.53V
1.2μA operating supply current
MAX16021PTEW+ Applications
There are a lot of Maxim Integrated MAX16021PTEW+ Voltage Supervisors applications.
- Display equipment
- Microcontroller system
- DSP
- Power distribution systems of infant care room
- DC stabilized power supply module
- Power distribution systems of operating room
- Leakage protection
- Magnetic resonance imaging
- Transformer load monitoring equipment
- Battery cars
