MAX1602EEE
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 1Ohm |
| Applications | PCMCIA/Cardbus Switch |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 667mW |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX1602 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Operating Supply Voltage | 12V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Analog IC - Other Type | DPDT |
| Operating Supply Current | 20μA |
| Output Current | 120mA |
| Max Supply Current | 200μA |
| Min Input Voltage | 11V |
| Max Input Voltage | 13V |
| Height | 1.55mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1602EEE Overview
Using Tube as a shipping the power management path is acceptable.The package is conveniently packaged the power management in 16-SSOP (0.154, 3.90mm Width) .An easy-to-adapt universal mounting system is provided by Surface Mount .The power management is designed for use with applications at PCMCIA/Cardbus Switch .Ensure that the operating temperature of the power management ic is set to -40°C~85°C in order to prevent malfunctions.For its operation, this power management requires 3V~5.5V voltage.Try search MAX1602 to get more power ic's pin-to-pin solutions for your special needs.power ic's power ic's pin-to-pinIt is possible to find 16 terminals on the power ic.This analog IC has received a great deal of praise as a DPDT analog instruments designs.A power managment ic with 16 pins is available.It is equipped with a Surface Mount for mounting on a PCB or other board.The power manager can perform numerous demanding tasks when supplied with 3.3V voltage.Power ic pinout starts with the 16 pins.An input voltage of 20μA is required for this power management ic to operate.It belongs to the Power Management Circuits series.In order to start up, it needs at least 3V .2 channels cooperate together to maintain the output quality.If the voltage is greater than 5.5V , you are not supposed to power the power supply ic.It is enough to run the power management chip with 3.3V power supplies.There are a total of 2 outputs supported.There should be 120mA output from the ic power supply at the moment.
MAX1602EEE Features
Mainly used in PCMCIA/Cardbus Switch applications
Operating temperature: -40°C~85°C
DPDT analog IC
2 Outputs
MAX1602EEE Applications
There are a lot of Maxim Integrated MAX1602EEEPower Management applications.
- WOA
- Industrial PC
- Debug
- LP2996-N: DDR1 Termination Voltage
- Netbooks
- Electronic Test Equipment
- Automotive Navigation Systems
- Printers
- Communications payload
- Telecom Rectifiers
