MAX16041TE+
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX16041 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 16 |
| Number of Channels | 2 |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 2.2V |
| Operating Supply Current | 52μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 9 Selectable Threshold Combinations |
| Number of Voltages Monitored | 2 |
| Reset Timeout | 140ms/Adjustable Minimum |
| Supply Current-Max (Isup) | 0.08mA |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Sequencer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
MAX16041TE+ Overview
Power management is mounted through 16 terminals. There is a Tube-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. There are 16-WQFN Exposed Pad functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Sequencer products. Packages are specified to have an average peak reflow temperature of 260. IC management conducts in a 3.3V-voltage supply. During operation, the power ic is supplied with a voltage of 2. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 16 pins on power management. This power management has 16 pins. IC management can only work with a supply voltage of 2.2V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 28V volts. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 52μA. It is always advisable to use MAX16041, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX16041TE+ Features
Sequencer type
Minimum supply voltage of 2.2V
52μA operating supply current
MAX16041TE+ Applications
There are a lot of Maxim Integrated MAX16041TE+ Voltage Supervisors applications.
- Detection of phase loss
- Dash board
- Set top box
- Military communications
- Leakage protection
- Consumer electronics
- Battery-powered equipment
- Low voltage/high power - AI, GPU
- Stable power system
- Detection of phase sequence
