MAX16047ETN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | System Manager |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| HTS Code | 8542.32.00.51 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 3.81W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX16047 |
| Output | Open Drain, Push-Pull |
| Pin Count | 56 |
| Number of Channels | 12 |
| Max Supply Voltage | 14V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 3.8mA |
| Nominal Supply Current | 3.8mA |
| Adjustable Threshold | YES |
| Reset | Active Low |
| Number of Voltages Monitored | 12 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 5mA |
| Height Seated (Max) | 0.8mm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX16047ETN+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 56 in total. Packaging is in the form of a Tube. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 12 channels. Please find attached 56-WFQFN Exposed Pad functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the System Manager line. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. During operation, the power ic is supplied with a voltage of 12. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 56 pins on the board. 56 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 3V. This IC power should be powered by no more than 14V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain, Push-Pull as the output voltage. As far as the supply current of the power management is concerned, it is 3.8mA. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use MAX16047, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX16047ETN+ Features
System Manager type
Minimum supply voltage of 3V
3.8mA operating supply current
MAX16047ETN+ Applications
There are a lot of Maxim Integrated MAX16047ETN+ Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Automotive permanent magnet synchronous motors
- Satellite navigation
- Display equipment
- External alarm
- Smartphones
- Fire equipment power monitoring system
- Data storage applications
- Electrical fire monitoring system
- Network equipment
