banner_page

MAX16055HAUB+

3.3V10 Terminals 10-Pin MAX16055 Voltage supervisor6 Channels Min 1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX16055HAUB+
  • Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 690
  • Description: 3.3V10 Terminals 10-Pin MAX16055 Voltage supervisor6 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins 10
Operating Temperature -40°C~125°C TA
Packaging Tube
Published 2009
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Type Multi-Voltage Supervisor
Additional Feature MANUAL RESET INPUT
HTS Code 8542.39.00.01
Subcategory Power Management Circuits
Max Power Dissipation 444mW
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Base Part Number MAX16055
Output Open Drain or Open Collector
Pin Count 10
Number of Channels 6
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 55μA
Nominal Supply Current 55μA
Adjustable Threshold YES
Watchdog Timer No
Reset Active Low
Voltage - Threshold 6 Selectable Threshold Combinations
Number of Voltages Monitored 6
Reset Timeout 140ms Minimum
Undervoltage Threshold 500mV
Height Seated (Max) 1.1mm
Length 3mm
Width 3mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

MAX16055HAUB+ Overview


There are 10 terminals on this power management that allow it to be mounted. It is packaged with Tube. In this IC power you will find 1 functions for you to refer to. There are a total of 6 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. When 3.3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 6. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 10 pins. This power management has 10 pins. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. For this power management, there is an 55μA volt supply current. There are other features such as MANUAL RESET INPUT to name a few. For similar manage ics search of the manufacturer, you can always refer to MAX16055, the base PMIC number.

MAX16055HAUB+ Features


Multi-Voltage Supervisor type
Minimum supply voltage of 1V
55μA operating supply current

MAX16055HAUB+ Applications


There are a lot of Maxim Integrated MAX16055HAUB+ Voltage Supervisors applications.

  • Detection of phase loss
  • Urban rail transit weak current power monitoring
  • Satellite navigation
  • WiFi router
  • Important electronics for automotive safety
  • Computer applications
  • Medical-specific isolation transformer
  • Analog circuit
  • emergency room
  • Set top box

Write a review

Note: HTML is not translated!
    Bad           Good