MAX1607ESA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 60Ohm |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX1607 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 700mA |
| Input Voltage-Nom | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 35μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 μs |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 20 μs |
| Switcher Configuration | SINGLE |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 60m Ω |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1607ESA Overview
As you can see, it's packaged in the way of a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.Mounting type Surface Mount is selected for the LED driving board.A USB Switch switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of P-Channel volts.It is part of the MAX1607 family of LED drivers.A total of 8 terminations have been recorded.For operation, 8 pins are used.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 700mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.In this case, it is mounted in the way of Surface Mount.It is equipped with a total of 8 pins.It has a resistance of 60Ohm.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.In this LED driving board, the analog IC SWITCHING REGULATOR is employed.In this case, the power supply is 5V.Voltage input is limited to 5.5V volts.It requires 2.7V volts as the minimum input voltage.
MAX1607ESA Features
Supplied from 5V
Resistance of 60Ohm
MAX1607ESA Applications
There are a lot of Maxim Integrated MAX1607ESA Power Switches ICs applications.
- Gaming
- Portable Video Game Players
- USB3.1 Power Delivery
- USB Ports/Hubs
- Various applications equipped with buttons
- Storage (HDDs, SSDs)
- USB Power Distribution
- Mobile Communication Devices
- PC Card Hot Swap
- Portable GPS
