MAX1623EAP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1623 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Voltage - Input (Max) | 5.5V |
| Output Type | Adjustable (Programmable) |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 3A |
| Voltage - Output (Min/Fixed) | 1.1V 2.525V 3.33V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 350kHz |
| Control Technique | CONSTANT OFF TIME |
| Synchronous Rectifier | Yes |
| Voltage - Output (Max) | 3.8V |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
MAX1623EAP+ Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. During the development of this harley voltage regulator, 20 terminations were made. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. The space-saving 20-SSOP (0.209, 5.30mm Width) package is available for this voltage regulator. In this case, DC DC switching regulator has 1 outputs configured to it. There are output pins on this DC DC switching regulator that generate Adjustable (Programmable) output. A Surface Mount mounting is required for this switching regulator. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. In this voltage regulator 12v, the switching frequency is Up to 350kHz. The voltage regulator can be operated with a voltage as low as 4.5V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 1.1V 2.525V 3.33V. As a result of the 3A output current, voltage regulator offers maximum flexibility in design. As far as the voltage input is concerned, DC DC switching regulator can accept up to 5.5V. Its 260 peak reflow temperature makes this regulator essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 5V. There is a subcategory called Switching Regulator or Controllers that includes this voltage regulator. There is a DC/DC regulator in this family that belongs to the MAX1623 family. The maximal output voltage of 3.8V allows adjusting voltage regulator for simple operation.
MAX1623EAP+ Features
1 outputs
Peak reflow temperature (Cel) of 260
MAX1623EAP+ Applications
There are a lot of Maxim Integrated MAX1623EAP+ Voltage Regulators applications.
- Milling machines
- Program control systems
- Bending machines
- Industrial controllers
- Alternators
- Medical equipment
- Flaw detection equipment
- Gear/thread machining machines
- Solar power plants
- Handheld GPS
