MAX1626ESA+
| Parameters | |
|---|---|
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 186.993455mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1626 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Max Output Current | 2A |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Power Dissipation | 471mW |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 3V~16.5V |
| Quiescent Current | 70μA |
| Output Power | 471mW |
| Control Features | Enable |
| Max Output Voltage | 5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 16.5V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Height | 1.5mm |
| Length | 5mm |
MAX1626ESA+ Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tube surrounds pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 3V~16.5V and has a 3V~16.5V supply voltage. A -40°C~85°C TA dc switcher is not a problem. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a DUAL terminal on the switching converters. The 8 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE FREQUENCY MODULATION. Other relevant dc to dc converter ics can be found by searching "MAX1626". Total pins of switching converter are 8. Switching converter is a type of Switching Regulator or Controllers in particular. Statistically, the DC regulator outputs 5V voltage. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controller operates at 300kHz Hz. During dormancy, the dc switching uses 70μA. The dc switcher's maximum input voltage is 16.5V, so users must limit the voltage accordingly. The dc switcher will not provide an output current greater than 2A. The datasheet indicates that the switching converter can output 5V volts at its maximum.
MAX1626ESA+ Features
Transistor Driver Outputs
Enable
PULSE FREQUENCY MODULATION
Frequency: 300kHz
MAX1626ESA+ Applications
There are a lot of Maxim Integrated MAX1626ESA+ DC to DC converter applications.
- Network technology
- Gear/thread machining machines
- Automation technology
- seismic instrument power circuits
- Fire elevators
- Direct power supply system
- Cutting machine tools
- Precision electronic equipment
- Wind power
- CNC system
