MAX1627ESA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 186.993455mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Base Part Number | MAX1627 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Max Output Current | 50mA |
| Voltage | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 3V~16.5V |
| Quiescent Current | 70μA |
| Output Power | 471mW |
| Control Features | Enable |
| Max Output Voltage | 16V |
| Topology | Buck |
| Min Input Voltage | 3V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 16.5V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.3V |
| Switcher Configuration | SINGLE |
| Max Frequency | 300kHz |
| Duty Cycle (Max) | 100% |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1627ESA Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. dc motor controller is suitable for 1 output generation. PMIC packaging is solid with a Tube enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 3V~16.5V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 8 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE FREQUENCY MODULATION. You can find other relevant dc to dc converter ics by searching "MAX1627". 8 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 5V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 3A. DC switcher's Surface Mount qualifies it for most applications and prototypes. 300kHz is the maximum frequency of this dc regulators. As long as the dc switching is in a dormant state, it utilizes 70μA. In order to limit the voltage of a dc switcher whose maximum input voltage is 16.5V, it must be limited by the user. A voltage of 3V is required for the supply. The dc switcher will not provide an output current greater than 50mA. Depending on the datasheet, the switching converter can output 16V volts at its peak. A voltage controller's lowest output voltage cannot be less than 1.3V.
MAX1627ESA Features
Transistor Driver Outputs
Enable
PULSE FREQUENCY MODULATION
MAX1627ESA Applications
There are a lot of Maxim Integrated MAX1627ESA DC to DC converter applications.
- Hydrogen power
- Packaging
- Various precision measuring instruments
- Imported equipment
- Handheld GPS
- Industrial robots
- Current source circuits
- Game consoles
- Low output voltage switching power supply circuits
- Injection molding machinery
