MAX1631EAI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX1631 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 4.2V~30V |
| Output Power | 762mW |
| Control Features | Enable, Reset, Sequencing |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.05mA |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 330kHz |
| Duty Cycle (Max) | 99% |
| Output Phases | 1 |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1631EAI Overview
With a 28-SSOP (0.209, 5.30mm Width) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. 4.2V~30V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. A switching controller such as this can switch at a value of 200kHz~300kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. Enable, Reset, Sequencing provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 28. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 15V. You can find other relevant dc to dc converter ics by searching "MAX1631". There are a total of 28 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 5V. In most cases, the dc dc regulator's output current is 4A. This information should be noted when you begin working with the component. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher's330kHz is the maximum frequency of this dc regulators. When running the voltage regulator dc to dc in a circuit, users should apply 30V to ensure safety and reliability. In order to ensure proper operation, the controller should not receive more current than 0.05mA.
MAX1631EAI Features
Transistor Driver Outputs
Switching Frequency: 200kHz~300kHz
Enable, Reset, Sequencing
PULSE WIDTH MODULATION
MAX1631EAI Applications
There are a lot of Maxim Integrated MAX1631EAI DC to DC converter applications.
- ATMs
- Printing
- Gear/thread machining machines
- Printing equipment
- Computer application technology
- SMT equipment
- Grinders
- Lathes
- Post equipment
- Drilling machines
