MAX1634EAI+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1634 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.2V~30V |
| Control Features | Enable, Reset, Sequencing |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.05mA |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 330kHz |
| Duty Cycle (Max) | 99% |
| Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1634EAI+T Overview
With its 28-SSOP (0.209, 5.30mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. The pmic is packaged in Tape & Reel (TR) solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 4.2V~30V voltage are supplied and operated. Worked in a -40°C~85°C TA dc switcher before. It can switch at 200kHz~300kHz. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Enable, Reset, Sequencing. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 28 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. Other relevant dc to dc converter ics will be returned if you search "MAX1634". 28 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. As determined by the test statistics, the output voltage of DC regulator is 5V. If you start a project, note down the dc dc regulator's usual output current of 1.5A. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. This dc regulatorhas a max frequency of 330kHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 30V. You should not supply more current than 0.05mA to the controller.
MAX1634EAI+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz~300kHz
Enable, Reset, Sequencing
PULSE WIDTH MODULATION
MAX1634EAI+T Applications
There are a lot of Maxim Integrated MAX1634EAI+T DC to DC converter applications.
- Smoke exhaust equipment
- seismic instrument power circuits
- Shearing machines
- Textile machinery
- Sensitive electronic devices
- Refrigerators of central air conditioners
- Imported equipment
- Computer rooms
- Magnetohydrodynamic power
- Large fire protection systems
