MAX1649CSA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~16V |
| Control Features | Enable |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 300kHz |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 96.5% |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
MAX1649CSA Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. An enclosure of Tube is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 3V~16V. Qualified to work in an dc switcher with 0°C~70°C TA. This switching controller can switch at Up to 300kHz. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Enable. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 8 terminations. PULSE FREQUENCY MODULATION is an example of one of the control techniques these dc dc converter ics adapt. 5V nominal DC switcher's voltage input. It is recommended that the dc dc voltage regulator's minimum input voltage be 3V. Statistically, DC regulator outputs 5V volts.
MAX1649CSA Features
Transistor Driver Outputs
Switching Frequency: Up to 300kHz
Enable
PULSE FREQUENCY MODULATION
MAX1649CSA Applications
There are a lot of Rochester Electronics, LLC MAX1649CSA DC to DC converter applications.
- Machining centers
- Thermal power
- Electric water heaters
- Planers
- Domestic water pumps
- Handheld GPS
- Linear guide
- ATMs
- Boring machines
- Radio equipment
