MAX1651ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 186.993455mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | MAX1651 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 16V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | 3V~16V |
| Control Features | Enable |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 300kHz |
| Max Input Voltage | 16V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 300kHz |
| Max Duty Cycle | 96.5 % |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1651ESA+ Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). Voltages 3V~16V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~85°C TA. Switching can be done at Up to 300kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Enable. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. Different dc switching's functions can be applied to 8 terminations. It includes PULSE FREQUENCY MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 5V is input. A search for "MAX1651" will reveal other relevant dc to dc converter ics. The switching converter has a total of 8 pins. There is a particular type of Switching Regulator or Controllers in switching converter. DC regulator outputs 16V voltage based on test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 2.5A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 96.5 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. The max frequency of the pmic can reach 300kHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 16V. In order to limit the voltage of a dc switcher whose maximum input voltage is 16V, it must be limited by the user.
MAX1651ESA+ Features
Transistor Driver Outputs
Switching Frequency: Up to 300kHz
Enable
PULSE FREQUENCY MODULATION
Max Duty Cycle: 96.5 %
MAX1651ESA+ Applications
There are a lot of Maxim Integrated MAX1651ESA+ DC to DC converter applications.
- Window air conditioners
- Terrestrial set-top boxes
- SMT equipment
- Planers
- Lathes
- Cutting machine tools
- Thermal power
- Adjustable voltage or current linear circuits
- Milling machines
- Wind power
