MAX1652EEE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX1652 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~30V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 350kHz |
| Max Duty Cycle | 98 % |
| Output Phases | 1 |
| Length | 4.89mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX1652EEE Overview
Capsuled in the 16-SSOP (0.154, 3.90mm Width) package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 2 numbers. There is a Tube solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 4.5V~30V volts and has 4.5V~30V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 150kHz 300kHz. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . The 16 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. MAX1652 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 16 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.5V. Statistically, the DC regulator outputs 5.5V voltage. The dc dc regulator's usual output current is 10A, which should be noted down when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 98 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. 350kHz is the maximum frequency of this dc regulators. Hence, PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE is used to better suit the DC to DC voltage regulator's situation. To run the voltage regulator dc to dc safely and reliably, users should apply 30V to the voltage regulator dc to dc.
MAX1652EEE Features
Transistor Driver Outputs
Switching Frequency: 150kHz 300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 98 %
PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE
MAX1652EEE Applications
There are a lot of Maxim Integrated MAX1652EEE DC to DC converter applications.
- Flaw detection equipment
- Experimental setup
- Sink circuits
- Hydro power
- Computer application technology
- Sensitive electronic devices
- Analog precision reference circuits
- Product burn-in
- Milling machines
- Cutting machine tools
