MAX1653EEE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.635mm |
| Frequency | 340kHz |
| Base Part Number | MAX1653 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~30V |
| Output Power | 667mW |
| Control Features | Enable, Soft Start |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz 300kHz |
| Max Input Voltage | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 200 ns |
| Min Output Voltage | 2.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 99 % |
| Duty Cycle (Max) | 98% |
| Height | 1.481mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1653EEE Overview
The switching controller fits in the 16-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 1. Tube is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). Voltages 4.5V~30V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller can be switched at 150kHz 300kHz. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Enable, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 16 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Other relevant dc to dc converter ics can be found by searching "MAX1653". 16 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 5.5V. You should note down the dc dc regulator's usual output current of 10A when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 99 % during power-up and power-down. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at a frequency of 340kHz. To better satisfy the need, DC to DC voltage regulator has a value of PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE. When running the voltage regulator dc to dc in a circuit, users should apply 30V to ensure safety and reliability. The maximum input voltage of dc switcher is 30V, so users should limit their voltage accordingly. There will be 10A output current greater than 10A from the dc switcher. A datasheet states that the switching converter can output 5.5V volts at its maximum. The voltage controller's lowest voltage output is not less than 2.5V.
MAX1653EEE Features
Transistor Driver Outputs
Switching Frequency: 150kHz 300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99 %
Frequency: 340kHz
PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE
MAX1653EEE Applications
There are a lot of Maxim Integrated MAX1653EEE DC to DC converter applications.
- Computer-related products
- CMM
- Boring machines
- Correction machines
- Energy management systems
- Die casting equipment
- Electric heating, lighting
- Precision electronic equipment
- Mobile phones
- Linear guide
