MAX1653ESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 340kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1653 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~30V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz 300kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 98% |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1653ESE+ Overview
Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 4.5V~30V volts and has 4.5V~30V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. This switching controller can switch at 150kHz 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Enable, Soft Start which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Searching "MAX1653" will return other relevant dc to dc converter ics. 16 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. DC regulator outputs 5.5V voltage based on test statistics. This dc to dc regulator accepts only 30V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. 340kHz is the frequency of the switching controller. As a result, DC to DC voltage regulator has a value of PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE so that the need can be met more directly.
MAX1653ESE+ Features
Transistor Driver Outputs
Switching Frequency: 150kHz 300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Frequency: 340kHz
PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE
MAX1653ESE+ Applications
There are a lot of Maxim Integrated MAX1653ESE+ DC to DC converter applications.
- PSRR circuits
- Smoke exhaust equipment
- Hydraulic presses
- Low output voltage switching power supply circuits
- USB circuits
- Access control systems
- Serial communication converter
- Emergency lighting monitoring equipment
- Cutting machine tools
- Wide-range voltage regulation circuits
