MAX1653ESE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Frequency | 340kHz |
| Base Part Number | MAX1653 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~30V |
| Output Power | 696mW |
| Control Features | Enable, Soft Start |
| Max Output Voltage | 5.25V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz 300kHz |
| Max Input Voltage | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 4.85V |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 98% |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX1653ESE Overview
This switching controller fits most application requirements since it is packaged in a 16-SOIC (0.154, 3.90mm Width) package. There is sufficient capacity to generate switching controller for outputs 1. Tube solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~30V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Switching can be done at 150kHz 300kHz with this switching controller. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Enable, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. 16 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Other relevant dc to dc converter ics can be found by searching "MAX1653". In total, switching converter has 16 pins. The type is a particular Switching Regulator or Controllers of switching converter. DC regulator outputs 5.5V voltage according to the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 10A. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. The switching controller works at a frequency of 340kHz. As a result, DC to DC voltage regulator has a value of PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE so that the need can be met more directly. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 30V. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 30V. Voltage 4.5V is needed for the supply. Input current cannot exceed 10A with this dc switcher. Its datasheet indicates the switching converter can output a maximum of 5.25V volts. 4.85V voltage output is lower than 4.85V.
MAX1653ESE Features
Transistor Driver Outputs
Switching Frequency: 150kHz 300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Frequency: 340kHz
PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE
MAX1653ESE Applications
There are a lot of Maxim Integrated MAX1653ESE DC to DC converter applications.
- Flaw detection equipment
- Packaging
- Correction machines
- Post equipment
- Constant current circuits
- Geothermal power
- Direct power supply system
- Current source circuits
- CNC system
- Nuclear power plants
