MAX1653ESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1653 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~30V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz 300kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 98% |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1653ESE+T Overview
It comes in a 16-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. dc controls with 4.5V~30V voltage are supplied and operated. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. In this switching controller, the switch can be set to 150kHz 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. Enable, Soft Start provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 16 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "MAX1653". Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Considering the dc to dc regulator can only accept 30V input voltage, it is important to take note of this. As a result, DC to DC voltage regulator has a value of PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE so that the need can be met more directly.
MAX1653ESE+T Features
Transistor Driver Outputs
Switching Frequency: 150kHz 300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE
MAX1653ESE+T Applications
There are a lot of Maxim Integrated MAX1653ESE+T DC to DC converter applications.
- Analog precision reference circuits
- Grinders
- Imported equipment
- Wide-range voltage regulation circuits
- Remotely powered electric motors
- Arc suppression circuits
- Geothermal power
- Automatic testing equipment
- Production lines
- Domestic water pumps
