MAX1655EEE
| Parameters | |
|---|---|
| Duty Cycle (Max) | 98% |
| Length | 4.89mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX1655 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~30V |
| Output Power | 667mW |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz 300kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
MAX1655EEE Overview
The switching controller fits in the 16-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. 1 outputs are supported by the dc motor controller. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 4.5V~30V volts and has 4.5V~30V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. The switching controller can be switched at 150kHz 300kHz. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of 16 terminations are available in dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. In addition to "MAX1655", there are other relevant dc to dc converter ics you can find. There is a particular type of Switching Regulator or Controllers in switching converter. dc dc voltage regulators should have a minimum input voltage of 4.5V. At most, the dc to dc regulator accepts 30V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. For better satisfaction, the value of DC to DC voltage regulator is PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE.
MAX1655EEE Features
Transistor Driver Outputs
Switching Frequency: 150kHz 300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
PFM CONTROL TECHNIQUE IS ALSO POSSIBLEPFM CONTROL TECHNIQUE IS ALSO POSSIBLE
MAX1655EEE Applications
There are a lot of Maxim Integrated MAX1655EEE DC to DC converter applications.
- Hydrogen power
- CMM
- Product burn-in
- Motor controller circuits
- Handheld GPS
- Flexible manufacturing cells
- Servo drive system
- Mobile phones
- Analog precision reference circuits
- Electrical power transmission
