MAX16801AEUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | MATTE TIN |
| Applications | Backlight, Lighting |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX16801 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Power Dissipation | 362mW |
| Output Current | 1A |
| Max Supply Current | 2.5mA |
| Max Output Voltage | 23V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| High Level Output Current | 500μA |
| Low Level Output Current | 500μA |
| Dimming | Analog, PWM |
| Switching Frequency | 262kHz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16801AEUA+ Overview
Space is saved using its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. In this LED driver, there are 1 outputs.It is possible to mount the led driver using Surface Mount.With high reliability and efficiency, this emerges as a AC DC Offline Switcher.-40°C~85°C TA is the operating temperature of the led driver.Taking advantage of Backlight, Lighting has considerable benefits.In this case, the termination value is 8.With a base of 8, this LED light driver is configured.Surface Mount has been mounted with the device.The LED driver is based on part number MAX16801.It is acceptable to have a maximum voltage of 265V.The device has 8 pins.The minimal input voltage is 85V.With a minimal supply voltage of 85V, it reaches the highest efficiency levels.The allowable maximum value of supply current reaches 265V.When the maximum supply current is less than 2.5mA, this device is able to provide high efficiency.The load is capable of receiving 1A current.Electronic components can function properly when their switching frequency is set to 262kHz.There is 100V voltage output from it.Ideally, the output voltage should not exceed 23V.Device operation requires 12V volts from the circuit.
MAX16801AEUA+ Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Switching frequency of 262kHz
Output voltage of 100V
MAX16801AEUA+ Applications
There are a lot of Maxim Integrated MAX16801AEUA+ LED Driver ICs applications.
- Replacement lamps
- Down lights
- Museum lighting
- Down lighting
- Stage Lighting and Signage
- LED Lighting PFCs, Linear Dimmable
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for Tablets and Note PCs
- Constant Voltage Power Source for portable equipment
- LED Lightings for Industrial Equipment
