MAX16801AEUA+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 262kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX16801 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 12V |
| Power Dissipation | 362mW |
| Max Supply Current | 2.5mA |
| Input Voltage (Min) | 9.05V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 23.6V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| High Level Output Current | 500μA |
| Low Level Output Current | 500μA |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 265V |
| Voltage - Supply (Min) | 85V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16801AEUA+T Overview
Using its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is possible to save board space. Typically, LED drivers have 1 outputs.Mounting is done according to the Surface Mount method.In this case, the AC DC Offline Switcher emerges as highly efficient and reliable.The LED driver is capable of operating at a temperature of -40°C~85°C TA.A number of benefits are available to Backlight, Lighting.It operates based on the frequency of 262kHz.It operates with 8 terminations.The base of this board is configured as 8 pins.If the voltage supply is lower than 85V, undetermined failures may occur.This is mounted by Surface Mount.LED drivers have a base part number of MAX16801.This device contains 8 pins.There is a maximum value of 265V that can be used with it.When the supply current should be less than 2.5mA, the device will provide high efficiency.In order to power systems, 24V voltage is needed.When the device is operated, 12V volts are applied to the circuit.Working with an input voltage higher than or equal to 9.05V brings great convenience to its operation.The input voltage should be kept below 23.6V to ensure high stability.
MAX16801AEUA+T Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 262kHz
Operating with the supply voltage of 24V
MAX16801AEUA+T Applications
There are a lot of Maxim Integrated MAX16801AEUA+T LED Driver ICs applications.
- Street lighting
- General lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Replacement lamps
- Down lighting
- Auxiliary lights for on-vehicle cameras
- Architectural lighting
- Panel lighting
- Constant Voltage Power Source for portable equipment
- Flicker-free LED Lighting using R1580N
