MAX16801BEUA+
| Parameters | |
|---|---|
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| High Level Output Current | 500μA |
| Low Level Output Current | 500μA |
| Dimming | Analog, PWM |
| Switching Frequency | 262kHz |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX16801 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Power Dissipation | 362mW |
| Output Current | 1A |
| Max Supply Current | 2.5mA |
| Max Output Voltage | 23V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
MAX16801BEUA+ Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package saves space on the board. LED drivers design with 1 outputs.In this case, mounting method is Surface Mount.In this case, the AC DC Offline Switcher emerges as highly efficient and reliable.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.Backlight, Lighting has significant advantages.It is designed to work with 8 terminations.To form its configuration, 8 pins are used.On the Surface Mount, a device is mounted.There is a base part number MAX16801 for this LED driver.The supply voltage of 265V is an acceptable maximum value.The device has 8 pins.When the input voltage is set to 85V, it operates.The system works with a minimum supply voltage of 85V in order to achieve maximum efficiency.Supply current is limited to 265V at its maximum value.When the maximum supply current is less than 2.5mA, this device is capable of providing high efficiency.The current that can be supplied to the load is 1A.This electronic component can fully perform its functions when the switching frequency is kept at 262kHz.There is 100V voltage output from it.Voltages above 23V should not be allowed.When the device is operated, 12V volts are applied to the circuit.
MAX16801BEUA+ Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Switching frequency of 262kHz
Output voltage of 100V
MAX16801BEUA+ Applications
There are a lot of Maxim Integrated MAX16801BEUA+ LED Driver ICs applications.
- Museum lighting
- Stage Lighting and Signage
- Medical surgery lighting
- Portable lighting
- Refrigeration lighting
- Replacement lamps
- Gallery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Panel lighting
- LED Lighting PFCs, Linear Dimmable
