MAX16801BEUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 262kHz |
| Base Part Number | MAX16801 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 12V |
| Power Dissipation | 362mW |
| Max Supply Current | 2.5mA |
| Input Voltage (Min) | 9.05V |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 23.6V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| High Level Output Current | 500μA |
| Low Level Output Current | 500μA |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 265V |
| Voltage - Supply (Min) | 85V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16801BEUA+T Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) saves board space. LED drivers design with 1 outputs.Mounting is done according to the Surface Mount method.The system emerges as a AC DC Offline Switcher with high efficiency.-40°C~85°C TA is the operating temperature for the led light driver.It provides considerable benefits for Backlight, Lighting.262kHz is the frequency in which it operates.It operates with terminations of 8.There are 8 pins on the base of this LED driver.It is possible for undetermined failures to occur if the voltage supply is lower than 85V.The device has been mounted on the Surface Mount.LED drivers have a base part number of MAX16801.On it, there are 8 pins.It is optimized for offering a maximum value of supply voltage of 265V.A minimal supply current is required in order for this device to provide high efficiency.In order to power systems, 24V voltage is needed.When the device is operated, 12V volts are applied to the circuit.Input voltages higher than or equal to 9.05V make its operation much more convenient.Maintaining a low input voltage can ensure a high level of stability.
MAX16801BEUA+T Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 262kHz
Operating with the supply voltage of 24V
MAX16801BEUA+T Applications
There are a lot of Maxim Integrated MAX16801BEUA+T LED Driver ICs applications.
- Refrigeration lighting
- Replacement lamps
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Flicker-free LED Lighting using R1580N
- Panel lighting
- A- lamps
- Architectural lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Constant Voltage Power Source for portable equipment
- LED Lighting PFCs, Linear Dimmable
