MAX16802AEUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX16802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 12V |
| Power Dissipation | 362mW |
| Output Current | 1A |
| Max Supply Current | 2.5mA |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 10.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| High Level Output Current | 500μA |
| Low Level Output Current | 500μA |
| Dimming | Analog, PWM |
| Switching Frequency | 262kHz |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16802AEUA+ Overview
In order to save board space, the led driver uses the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. These LED drivers have 1 outputs.It is mounted using Surface Mount.In this case, the AC DC Offline Switcher emerges as highly efficient and reliable.When the temperature is -40°C~85°C TA, it can work normally.Backlight, Lighting has many advantages.It operates with terminations of 8.This configuration is built upon 8 pins.The mount is on its way to Surface Mount.The LED driver can be found under the base part number MAX16802.In this device, there are 8 pins.A minimal input voltage of 10.8V is required for it to operate.The allowable maximum value of supply current reaches 24V.As long as the maximum supply current is under 2.5mA, it can deliver high efficiency.Loads can only be powered by 1A current.Powering systems requires 24V voltages.The electronic component can function fully when the switching frequency is maintained at 262kHz.The output voltage is 100V.Operation of the device requires 12V volts to be applied to the circuit.
MAX16802AEUA+ Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 24V
Switching frequency of 262kHz
Output voltage of 100V
MAX16802AEUA+ Applications
There are a lot of Maxim Integrated MAX16802AEUA+ LED Driver ICs applications.
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lighting
- LED Lightings for Inspection Devices
- Industrial LED Lighting: Image Recognition Devices
- White LED Backlight for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED backlight driver for LCD displays for portable equipment
- Refrigeration lighting
