MAX16802AEUA+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 262kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX16802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 12V |
| Power Dissipation | 362mW |
| Max Supply Current | 2.5mA |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| High Level Output Current | 500μA |
| Low Level Output Current | 500μA |
| Dimming | Analog, PWM |
| Voltage - Supply (Min) | 10.8V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16802AEUA+T Overview
Save board space with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. In this LED driver, there are 1 outputs.Surface Mount is used to mount the led driver.In this case, the result is a AC DC Offline Switcher with high efficiency.-40°C~85°C TA is the operating temperature for the led light driver.Backlight, Lighting has many benefits.As a result, it operates based on the frequency of 262kHz.In this case, the terminations are set to 8.The base of this board is configured as 8 pins.A voltage supply less than 10.8V could result in undetermined failures.It is mounted in the way of Surface Mount.LED drivers are found under the base part number MAX16802.It consists of 8 pins.When the maximum supply current is less than 2.5mA, this device is capable of providing high efficiency.It is necessary to have 24V voltages inside systems to power them.When operating the device, 12V volts are assigned to the circuit.
MAX16802AEUA+T Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 262kHz
Operating with the supply voltage of 24V
MAX16802AEUA+T Applications
There are a lot of Maxim Integrated MAX16802AEUA+T LED Driver ICs applications.
- General lighting
- Panel lighting
- Gallery lighting
- Other Electronic Devices
- Constant Voltage Power Source for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- Amusement Machines
- White LED Backlight for portable equipment
- A- lamps
- Stage Lighting and Signage
