MAX16802BEUA+T
| Parameters | |
|---|---|
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| High Level Output Current | 500μA |
| Low Level Output Current | 500μA |
| Dimming | Analog, PWM |
| Voltage - Supply (Min) | 10.8V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Max Power Dissipation | 362mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 262kHz |
| Base Part Number | MAX16802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 12V |
| Power Dissipation | 362mW |
| Max Supply Current | 2.5mA |
MAX16802BEUA+T Overview
Board space is saved by its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.For the design of these LED drivers, 1 outputs are used.The led driver mounting is done by using Surface Mount.When it emerges as a AC DC Offline Switcher, it shows high-performance and reliability.LED drivers capable of operating at -40°C~85°C TA can be used.Backlight, Lighting has considerable advantages.The frequency of 262kHz determines how it operates.In this case, it uses 8 terminations.It has a base configuration of 8 pins.Failures may occur if the voltage supply is below 10.8V.Surface Mount has been mounted with the device.LED drivers can be found under the base part number MAX16802.The device has a pin count of 8.It is possible to provide high efficiency when the maximal supply current is less than 2.5mA.Powering systems requires 24V voltages.The circuit is assigned 12V volts when operating.
MAX16802BEUA+T Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 262kHz
Operating with the supply voltage of 24V
MAX16802BEUA+T Applications
There are a lot of Maxim Integrated MAX16802BEUA+T LED Driver ICs applications.
- Down lights
- Scanners and Handy Terminals
- Museum lighting
- Stage Lighting and Signage
- Dimmable LED for vehicle interiors
- LED Lightings for Industrial Equipment
- General lighting
- Portable lighting
- White LED Backlight for portable equipment
- Medical surgery lighting
