MAX16803ATE+
| Parameters | |
|---|---|
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Lighting, Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.6667W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MAX16803 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Max Output Current | 350mA |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 6.5V |
| Power Dissipation | 2.6667W |
| Output Current | 350mA |
| Max Supply Current | 1.4mA |
| Max Output Voltage | 38V |
| Voltage - Output | 39.5V |
| Min Input Voltage | 6.5V |
| Max Input Voltage | 40V |
| Internal Switch(s) | Yes |
| High Level Output Current | 350mA |
| Low Level Output Current | 35mA |
| Dimming | PWM |
| Number of Segments | 10 |
| Multiplexed Display Capability | NO |
| Height | 750μm |
| Length | 5.1mm |
| Width | 5.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MAX16803ATE+ Overview
16-WQFN Exposed Pad package saves space on the board. A LED driver using this design has 1 outputs.It is mounted using Surface Mount.In this case, it emerges as a Linear with a high efficiency.The led light driver is capable of working normally at -40°C~125°C TJ.There are considerable benefits for Automotive, Lighting, Signage.In this case, there are 16 terminations.With a base of 16, this LED light driver is configured.Based on our estimates, there are 10 segments.It has been mounted on Surface Mount.MAX16803 is the base part number for this LED driver.An acceptable maximum value for the supply voltage is 40V.It produces a voltage of 39.5V volts.This device contains 16 pins.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.This device requires a minimum voltage of 6.5V volts.It achieves maximum efficiency with a minimal voltage supply of 6.5V.In terms of supply current, 40V is the maximum value.It is capable of delivering high efficiency when the maximal supply current is below 1.4mA.There is no current that can be supplied to the load.The maximum output current of 350mA allows it to deliver all benefits of a LED driver.It is recommended that the output voltage be no higher than 38V.
MAX16803ATE+ Features
Available in the 16-WQFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Supply voltage of 12V
MAX16803ATE+ Applications
There are a lot of Maxim Integrated MAX16803ATE+ LED Driver ICs applications.
- Gallery lighting
- High-end retail lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lightings for Inspection Devices
- Refrigeration lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- OLED power supply for portable equipment
- Down lighting
- LED headlights
