MAX16805ATP+
| Parameters | |
|---|---|
| Switching Frequency | 400kHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.7586W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 400kHz |
| Base Part Number | MAX16805 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Max Output Current | 350mA |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5.5V |
| Power Dissipation | 2.7586W |
| Output Current | 350mA |
| Max Output Voltage | 39V |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 40V |
| Internal Switch(s) | Yes |
| High Level Output Current | 350mA |
| fmax-Min | 0.4 MHz |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
MAX16805ATP+ Overview
To save space on the board, it has a 20-WQFN Exposed Pad package. Typically, LED drivers have 1 outputs.Surface Mount is used for mounting the led light driver.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.If the led driver ic is set to -40°C~125°C TA, it will work normally.Automotive provides many benefits.Based on the frequency of 400kHz, it operates.20 terminations are designed for its operation.Its configuration is based on 20 pins.There are 1 segments.It has been mounted on Surface Mount.LED drivers are found under the base part number MAX16805.It is acceptable for the voltage to be 40V.In addition, it is equipped with a total of 20 pins.Further, it can be classified as Display Drivers based on its characteristics.When the input voltage is set to 5.5V, it operates.For maximum efficiency, it operates at the minimal voltage of 5.5V.There is 40V maximum value for supply current.The current that can be supplied to the load is 350mA.The electronic component can function fully when the switching frequency is maintained at 400kHz.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 350mA.It is important to keep the output voltage below 39V.
MAX16805ATP+ Features
Available in the 20-WQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 400kHz
Supply voltage of 12V
Switching frequency of 400kHz
MAX16805ATP+ Applications
There are a lot of Maxim Integrated MAX16805ATP+ LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- General lighting
- Museum lighting
- LED headlights
- LED Lightings for Inspection Devices
- Panel lighting
- High-end retail lighting
- Gallery lighting
- Amusement Machines
- Down lighting
