MAX16807AUI+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | TIN |
| Applications | Backlight, Lighting |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.162W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Frequency | 20kHz~1MHz |
| Base Part Number | MAX16807 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 15V |
| Power Dissipation | 2.162W |
| Output Current | 55mA |
| Max Supply Current | 5mA |
| Voltage - Output | 36V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 8V |
| Max Input Voltage | 26.5V |
| Internal Switch(s) | No |
| Low Level Output Current | 55mA |
| Dimming | PWM |
| Number of Segments | 8 |
| Switching Frequency | 1MHz |
| Voltage - Supply (Max) | 26.5V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16807AUI+ Overview
Using its 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package, it is possible to save board space. As part of the design of this LED driver, there are 8 outputs that have been used.In this case, mounting method is Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Controller.-40°C~125°C TA is the operating temperature for the led light driver.Backlight, Lighting has many advantages.In this case, the frequency is 20kHz~1MHz.In this case, the terminations are set to 28.The configuration of the board is built around 28 pins.It consists of 8 segments.The mount is in the way of Surface Mount.The LED driver is available under the part number MAX16807.There is 36V voltage output from it.The device has 28 pins.There is an optimization that allows a maximum supply voltage of 26.5V.Additionally, it can be classified as Display Drivers based on its characteristics.When the input voltage is set to 8V, it operates.Supply current is limited to 26.5V at its maximum value.A minimal supply current is required in order for this device to provide high efficiency.It is possible to supply the load with 55mA current.The power of systems depends on having 5.5V voltages inside.As long as the switching frequency is maintained at 1MHz, this electronic component is able to perform all of its functions properly.
MAX16807AUI+ Features
Available in the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 20kHz~1MHz
Supply voltage of 15V
Operating with the supply voltage of 5.5V
Switching frequency of 1MHz
MAX16807AUI+ Applications
There are a lot of Maxim Integrated MAX16807AUI+ LED Driver ICs applications.
- Scanners and Handy Terminals
- Down lights
- LED backlight driver for LCD displays for portable equipment
- Replacement lamps
- Museum lighting
- Stage and Studio lighting
- Panel lighting
- Flicker-free LED Lighting using R1580N
- Portable lighting
- Dimmable LED for vehicle interiors
