MAX16809ATU+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 38-WFQFN Exposed Pad |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | TIN |
| Applications | Backlight, Lighting |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.857W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20kHz~1MHz |
| Base Part Number | MAX16809 |
| Pin Count | 38 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 15V |
| Power Dissipation | 2.857W |
| Max Supply Current | 5mA |
| Voltage - Output | 36V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Current - Output / Channel | 55mA |
| Internal Switch(s) | No |
| High Level Output Current | 1.8mA |
| Low Level Output Current | 6mA |
| fmax-Min | 1 MHz |
| Dimming | PWM |
| Supply Voltage1-Nom | 15V |
| Number of Segments | 16 |
| Voltage - Supply (Max) | 26.5V |
| Voltage - Supply (Min) | 8V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.8mm |
| Length | 7mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16809ATU+T Overview
There is also a 38-WFQFN Exposed Pad package that is used to save space on the board. In LED drivers, the outputs are all set to 16.Surface Mount is used for mounting.It emergys as a DC DC Controller with high efficiency and reliable performance.The LED driver is capable of operating at a temperature of -40°C~125°C TA.Backlight, Lighting has significant advantages.Based on the frequency of 20kHz~1MHz, it operates.In order for it to operate, it has 38 terminations.A configuration of this chip is made up of 38 pins.If the voltage supply is lower than 8V, undetermined failures may occur.A total of 16 segments are estimated.It has been mounted on Surface Mount.There is a base part number MAX16809 for this LED driver.There is 36V voltage output from it.It consists of 38 pins.A maximum voltage of 26.5V is optimized for use by this device.Further, it can be classified as Display Drivers based on its characteristics.When the supply current should be less than 5mA, the device will provide high efficiency.The internal voltages needed to power systems is 5.5V.
MAX16809ATU+T Features
Available in the 38-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 20kHz~1MHz
Supply voltage of 5V
Operating with the supply voltage of 5.5V
MAX16809ATU+T Applications
There are a lot of Maxim Integrated MAX16809ATU+T LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Linear fluorescent
- OLED power supply for portable equipment
- Other Electronic Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Portable lighting
- Auxiliary lights for on-vehicle cameras
- Dimmable LED for vehicle interiors
- Gallery lighting
