MAX16810ATU+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 38-WFQFN Exposed Pad |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | TIN |
| Applications | Backlight, Lighting |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 20kHz~1MHz |
| Base Part Number | MAX16810 |
| Pin Count | 38 |
| Number of Outputs | 16 |
| Power Supplies | 15V |
| Power Dissipation | 2.857W |
| Max Supply Current | 5mA |
| Voltage - Output | 36V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Current - Output / Channel | 55mA |
| Internal Switch(s) | No |
| High Level Output Current | 1.8mA |
| Low Level Output Current | 6mA |
| fmax-Min | 1 MHz |
| Dimming | PWM |
| Supply Voltage1-Nom | 15V |
| Number of Segments | 16 |
| Voltage - Supply (Max) | 26.5V |
| Voltage - Supply (Min) | 8V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.8mm |
| Length | 7mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16810ATU+ Overview
38-WFQFN Exposed Pad package saves space on the board. This LED driver has 16 outputs.In order to mount the led light driver, Surface Mount is used.This emerges as a DC DC Controller with high efficiency and reliability.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.As a result, Backlight, Lighting is likely to benefit greatly.It operates at 20kHz~1MHz frequency.In this case, it uses 38 terminations.This configuration is built upon 38 pins.If the voltage supply is below 8V, undetermined failures may occur.A total of 16 segments are estimated.It has been mounted on Surface Mount.The LED driver can be found under the base part number MAX16810.There is a voltage output of 36V.The device has a pin count of 38.26.5V is the maximum value of supply voltage it offers.Moreover, it can be classified as Display Drivers due to its characteristics.This device is able to provide high efficiency when the maximal supply current should be less than 5mA.
MAX16810ATU+ Features
Available in the 38-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 20kHz~1MHz
Supply voltage of 3.3V
MAX16810ATU+ Applications
There are a lot of Maxim Integrated MAX16810ATU+ LED Driver ICs applications.
- Linear fluorescent
- LED headlights
- Street lighting
- LED backlight driver for LCD displays for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- OLED power supply for portable equipment
- Down lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED Lightings for Inspection Devices
- LED Lighting PFCs, Linear Dimmable
