MAX16814BEUP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.122W |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 200kHz~2MHz |
| Base Part Number | MAX16814 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 40V |
| Operating Supply Voltage | 40V |
| Power Supplies | 12V |
| Output Current | 2A |
| Max Supply Current | 5.5mA |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 4.75V |
| Max Input Voltage | 40V |
| Current - Output / Channel | 150mA |
| Internal Switch(s) | No |
| Dimming | PWM |
| Number of Segments | 4 |
| Switching Frequency | 2MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.1mm |
| Length | 6.5mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX16814BEUP+ Overview
The 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used for saving board space. The LED driver's design uses 4 outputs.Surface Mount is used to mount the led driver.It emerges as a DC DC Controller, which is efficient and reliable.It is possible for the led driver ic to function normally at -40°C~85°C TA.The benefits of Backlight, Lighting are considerable.Based on the frequency of 200kHz~2MHz, it operates.For its operation, terminations with a value of 0 are used.It has a base configuration of 20 pins.The number of segments is estimated to be 4.Surface Mount is mounted in the way.There is a base part number MAX16814 for this LED driver.In this device, there are 20 pins.Depending on its characteristics, it is classified into Display Drivers.As its minimal input voltage, it operates at 4.75V.Supply current is limited to 40V at its maximum value.If the maximum supply current is less than 5.5mA, the device is capable of providing high efficiency.The load is capable of receiving 2A current.Powering systems requires an internal voltage of 40V.It's possible for this electronic component to fully function when the switching frequency is maintained at 2MHz.There is 40V voltage output from it.
MAX16814BEUP+ Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 200kHz~2MHz
Supply voltage of 12V
Operating with the supply voltage of 40V
Switching frequency of 2MHz
Output voltage of 40V
MAX16814BEUP+ Applications
There are a lot of Maxim Integrated MAX16814BEUP+ LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- Flicker-free LED Lighting using R1580N
- LED Lightings for Industrial Equipment
- A- lamps
- Linear fluorescent
- Stage Lighting and Signage
- Street lighting
- Museum lighting
- Sports Facility Lighting
- Down lights
