MAX16816ATJ+
| Parameters | |
|---|---|
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.758W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.5mm |
| Frequency | 125kHz~500kHz |
| Base Part Number | MAX16816 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 76V |
| Power Dissipation | 2.758W |
| Output Current | 10A |
| Max Supply Current | 4.5mA |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Internal Switch(s) | No |
| High Level Output Current | 67mA |
| Low Level Output Current | 76mA |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 5.9V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2015 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Applications | Lighting, Signage |
MAX16816ATJ+ Overview
On the board, there is also a 32-WFQFN Exposed Pad package that saves space.In this LED driver, there are 1 outputs.Surface Mount is used to mount the led light driver.When it emerges as a DC DC Controller, it performs extremely well and is highly reliable.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.Taking advantage of Lighting, Signage has considerable benefits.The frequency of 125kHz~500kHz is used as the basis for its operation.The operation of this system is supported by 32 terminations.This LED driver is configured with a base of 32 pins.It is likely that undetermined failures will occur if the voltage supply is less than 5.9V.Segments counted are 1.It's mounted by Surface Mount.Part number MAX16816 represents this LED driver.28 pins are on the device.In addition to Display Drivers, it is also classified by its characteristics.As long as the maximum supply current is under 4.5mA, it can deliver high efficiency.10A is the maximum current the load can handle.In order for systems to function, a voltage of 0 is required internally.
MAX16816ATJ+ Features
Available in the 32-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 125kHz~500kHz
Supply voltage of 14V
Operating with the supply voltage of 76V
MAX16816ATJ+ Applications
There are a lot of Maxim Integrated MAX16816ATJ+ LED Driver ICs applications.
- LED Lightings for Inspection Devices
- OLED power supply for portable equipment
- LED backlight driver for LCD displays for portable equipment
- Constant Voltage Power Source for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Flicker-free LED Lighting using R1580N
- Dimmable LED for vehicle interiors
- Architectural lighting
- High-end retail lighting
- LED Lighting PFCs, Linear Dimmable
