MAX16816ATJ+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Supplier Device Package | 32-TQFN-EP (5x5) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Controller |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Lighting, Signage |
| Max Power Dissipation | 2.758W |
| Frequency | 125kHz~500kHz |
| Base Part Number | MAX16816 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 76V |
| Power Dissipation | 2.758W |
| Max Supply Current | 4.5mA |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Internal Switch(s) | No |
| High Level Output Current | 67mA |
| Low Level Output Current | 76mA |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 76V |
| Voltage - Supply (Min) | 5.9V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX16816ATJ+T Overview
In order to save board space, the 32-WFQFN Exposed Pad package is used. LED drivers use 1 outputs for their design.The mounting method adopted is Surface Mount.The system emerges as a DC DC Controller with high efficiency.-40°C~125°C TA is the operating temperature and it works fine.There are many benefits for Lighting, Signage.Based on the frequency of 125kHz~500kHz, it operates.The base of this board is configured as 32 pins.Failures may occur if the voltage supply is below 5.9V.The mount is in the direction of Surface Mount.The LED driver is available under the part number MAX16816.It is designed to provide a supply voltage of 76V at its maximum.When the maximum supply current is less than 4.5mA, the device is able to provide a high level of efficiency.For stable operation, the operating temperature should not exceed 125°C.Stable operation requires a temperature greater than -40°C.There is 76V internal voltage required to power systems.
MAX16816ATJ+T Features
Available in the 32-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 125kHz~500kHz
Operating with the supply voltage of 76V
MAX16816ATJ+T Applications
There are a lot of Maxim Integrated MAX16816ATJ+T LED Driver ICs applications.
- Street lighting
- Refrigeration lighting
- Flicker-free LED Lighting using R1580N
- A- lamps
- LED Lightings for Inspection Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Other Electronic Devices
- Sports Facility Lighting
- Down lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
