MAX16818ATI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.758W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 125kHz~1.5MHz |
| Base Part Number | MAX16818 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Output Voltage | 5.3V |
| Operating Supply Voltage | 28V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Power Dissipation | 2.758W |
| Output Current | 30A |
| Max Supply Current | 5.5mA |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 7V |
| Max Input Voltage | 28V |
| Internal Switch(s) | No |
| High Level Output Current | 4A |
| Low Level Output Current | 4A |
| Dimming | PWM |
| Number of Segments | 1 |
| Switching Frequency | 1.5MHz |
| Voltage - Supply (Min) | 4.75V |
| Multiplexed Display Capability | NO |
| Height | 730μm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16818ATI+ Overview
In order to save board space, the 28-WFQFN Exposed Pad package is used. LED drivers use 1 outputs for their design.As far as mounting is concerned, Surface Mount is adopted.It emerges as a DC DC Controller with high efficiency.At -40°C~125°C TA, the led driver is capable of operating.There are many benefits for Backlight.On the basis of the frequency 125kHz~1.5MHz, it operates.For its operation, terminations with a value of 0 are used.The configuration of the board is built around 28 pins.Having a voltage supply below 4.75V can lead to undetermined failures.The segment count is 1.I have mounted it by Surface Mount.It can be found under the part number MAX16818.There are 28 pins on it.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.A minimal input voltage of 7V is required for it to operate.Supply current cannot exceed 28V.Whenever the supply current is lower than 5.5mA, it can provide high efficiency.You can supply 30A current to the load.The internal voltages needed to power systems is 28V.It's possible for this electronic component to fully function when the switching frequency is maintained at 1.5MHz.There is 5.3V output voltage on this device.
MAX16818ATI+ Features
Available in the 28-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 125kHz~1.5MHz
Supply voltage of 5V
Operating with the supply voltage of 28V
Switching frequency of 1.5MHz
Output voltage of 5.3V
MAX16818ATI+ Applications
There are a lot of Maxim Integrated MAX16818ATI+ LED Driver ICs applications.
- Down lights
- A- lamps
- Refrigeration lighting
- Medical surgery lighting
- Amusement Machines
- Industrial LED Lighting: Image Recognition Devices
- LED headlights
- Stage Lighting and Signage
- Architectural lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
