MAX16822AASA/V+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Automotive, Lighting |
| Subcategory | Display Drivers |
| Max Power Dissipation | 588.2mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Frequency | 2MHz |
| Base Part Number | MAX16822 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 65V |
| Power Supplies | 24V |
| Power Dissipation | 588.2mW |
| Max Supply Current | 1.5mA |
| Topology | Step-Down (Buck) |
| Current - Output / Channel | 350mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Voltage - Supply (Min) | 6.5V |
| Multiplexed Display Capability | NO |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX16822AASA/V+T Overview
The 8-SOIC (0.154, 3.90mm Width) package conserves board space. LED drivers are designed with 1 outputs.Mounting is done according to the Surface Mount method.It is highly reliable and high-performing when it emerges as a DC DC Regulator.The led light driver is capable of operating at the operating temperature of -40°C~125°C TA.A number of benefits are available to Automotive, Lighting.It operates at 2MHz frequency.There are 8 terminations that are designed to operate with it.A configuration of this chip is made up of 8 pins.It is possible for undetermined failures to occur if the voltage supply falls below 6.5V.There are 2 segments in it.LED drivers can be found under the base part number MAX16822.It consists of 8 pins.According to its characteristics, it is also categorized into Display Drivers.The device can deliver high efficiency when the maximal supply current is less than 1.5mA.It is necessary to use 65V voltage to power systems.LED drivers from the Automotive, AEC-Q100 series are essential components for a wide variety of products.
MAX16822AASA/V+T Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 2MHz
Supply voltage of 24V
Operating with the supply voltage of 65V
MAX16822AASA/V+T Applications
There are a lot of Maxim Integrated MAX16822AASA/V+T LED Driver ICs applications.
- Replacement lamps
- Scanners and Handy Terminals
- Dimmable LED for vehicle interiors
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- General lighting
- Other Electronic Devices
- Linear fluorescent
- Down lights
- Museum lighting
- Portable lighting
