MAX16823ATE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Backlight, Lighting |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.666W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MAX16823 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Max Output Current | 70mA |
| Power Supplies | 12V |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5.5V |
| Power Dissipation | 2.666W |
| Output Current | 100mA |
| Voltage - Output | 39.3V |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 40V |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 3 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX16823ATE+ Overview
The board's 16-WQFN Exposed Pad package saves space. These LED drivers have 3 outputs.As far as mounting is concerned, Surface Mount is adopted.There is no doubt that this is a very efficient and reliable Linear.If the led driver ic is set to -40°C~125°C TA, it will work normally.There are considerable benefits for Automotive, Backlight, Lighting.In this case, the terminations are set to 16.A configuration of this chip is made up of 16 pins.There are 3 segments in it.It is mounted in the way of Surface Mount.The LED driver is available under the part number MAX16823.There is no maximum value acceptable for the supply voltage, so 40V is acceptable.There is 39.3V voltage output from it.In addition, it is equipped with a total of 16 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.A minimal input voltage of 5.5V is required for it to operate.To meet highest efficiency standards, it works on a supply voltage of 5.5V.It reaches 40V when the maximum supply current is allowed.100mA is the maximum amount of current that can be supplied to the load.When operating with a maximum output current of 70mA, it can deliver all the benefits of a LED driver.
MAX16823ATE+ Features
Available in the 16-WQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Supply voltage of 12V
MAX16823ATE+ Applications
There are a lot of Maxim Integrated MAX16823ATE+ LED Driver ICs applications.
- Amusement Machines
- Auxiliary lights for on-vehicle cameras
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Medical surgery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Constant Voltage Power Source for portable equipment
- Dimmable LED for vehicle interiors
- High-end retail lighting
- LED Lightings for Inspection Devices
- Linear fluorescent
