MAX16831ATJ+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Supplier Device Package | 32-TQFN-EP (5x5) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Controller |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Automotive, Lighting |
| Max Power Dissipation | 2.758W |
| Frequency | 125kHz~600kHz |
| Base Part Number | MAX16831 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 76V |
| Power Dissipation | 2.758W |
| Max Supply Current | 4.5mA |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Internal Switch(s) | No |
| High Level Output Current | 67mA |
| Low Level Output Current | 76mA |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 76V |
| Voltage - Supply (Min) | 5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX16831ATJ+T Overview
In order to save board space, the 32-WFQFN Exposed Pad package is used. The LED driver's design uses 1 outputs.Surface Mount is used to mount the led driver.In this case, it emerges as a DC DC Controller with a high efficiency.The led light driver is capable of operating at the operating temperature of -40°C~125°C TA.There are considerable benefits for Automotive, Lighting.The system operates on the basis of the frequency 125kHz~600kHz.It has a base of 32 pins.A voltage supply less than 5.5V will cause undetermined failures.Surface Mount is mounted on it.LED drivers have a base part number of MAX16831.There is an optimization that allows a maximum supply voltage of 76V.Its high efficiency is based on the fact that the maximal supply current should not exceed 4.5mA.The operating temperature should not exceed 125°C to ensure stable operation.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.The power of systems depends on having 76V voltages inside.
MAX16831ATJ+T Features
Available in the 32-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 125kHz~600kHz
Operating with the supply voltage of 76V
MAX16831ATJ+T Applications
There are a lot of Maxim Integrated MAX16831ATJ+T LED Driver ICs applications.
- Architectural lighting
- Street lighting
- Portable lighting
- Dimmable LED for vehicle interiors
- Industrial LED Lighting: Image Recognition Devices
- General lighting
- OLED power supply for portable equipment
- Gallery lighting
- Constant Voltage Power Source for portable equipment
- Museum lighting
