MAX16833AUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Lighting |
| Max Power Dissipation | 2.089W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz~1MHz |
| Base Part Number | MAX16833 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 65V |
| Power Dissipation | 2.089W |
| Max Supply Current | 4mA |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Internal Switch(s) | No |
| High Level Output Current | 700μA |
| Low Level Output Current | 700μA |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 5V |
| Multiplexed Display Capability | NO |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MAX16833AUE+T Overview
In order to save board space, the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used. Using this LED driver, there are 1 outputs.To mount, use Surface Mount.It is highly performing and reliable when it emerges as a DC DC Controller.If the led driver ic is set to -40°C~125°C TA, it will work normally.There are many benefits for Automotive, Lighting.As a result, it operates in accordance with the frequency of 100kHz~1MHz.For its operation, terminations with a value of 0 are used.Its configuration is based on 16 pins.A voltage supply below 5V may cause undetermined failures.The segment count is 1.I have mounted it by Surface Mount.This LED driver can be found under the base part number MAX16833.If the maximum current supply is less than 4mA, this device provides high efficiency.Powering systems requires an internal voltage of 65V.
MAX16833AUE+T Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 100kHz~1MHz
Supply voltage of 12V
Operating with the supply voltage of 65V
MAX16833AUE+T Applications
There are a lot of Maxim Integrated MAX16833AUE+T LED Driver ICs applications.
- Panel lighting
- LED Lightings for Industrial Equipment
- Down lighting
- Street lighting
- Constant Voltage Power Source for portable equipment
- Scanners and Handy Terminals
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Medical surgery lighting
- Dimmable LED for vehicle interiors
- LED Lighting PFCs, Linear Dimmable
