MAX16833BAUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Lighting |
| Max Power Dissipation | 2.089W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz~1MHz |
| Base Part Number | MAX16833 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 65V |
| Power Dissipation | 2.089W |
| Max Supply Current | 4mA |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Internal Switch(s) | No |
| High Level Output Current | 700μA |
| Low Level Output Current | 700μA |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 5V |
| Multiplexed Display Capability | NO |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MAX16833BAUE+T Overview
In order to save board space, the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used. These LED drivers have 1 outputs.The led driver mounting is done by using Surface Mount.With high efficiency, it emerges as a DC DC Controller.-40°C~125°C TA is a valid operating temperature for the led driver.Automotive, Lighting has many advantages.In this case, the frequency is 100kHz~1MHz.In this case, there are 16 terminations.To form its configuration, there are 16 pins.There may be undetermined failures if the voltage supply falls below 5V.It is estimated that there are 1 segments.There is a device mounted on the Surface Mount.The LED driver can be found under the base part number MAX16833.When the maximum supply current is below 4mA, the device can deliver high efficiency.The power of systems depends on having 65V voltages inside.
MAX16833BAUE+T Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 100kHz~1MHz
Supply voltage of 12V
Operating with the supply voltage of 65V
MAX16833BAUE+T Applications
There are a lot of Maxim Integrated MAX16833BAUE+T LED Driver ICs applications.
- Stage and Studio lighting
- Architectural lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Dimmable LED for vehicle interiors
- Linear fluorescent
- White LED Backlight for portable equipment
- Down lighting
- LED Lighting PFCs, Linear Dimmable
- Panel lighting
