MAX16834AUP/V+T
| Parameters | |
|---|---|
| Type | DC DC Controller |
| Applications | Automotive, Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.122W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Frequency | 100kHz~1MHz |
| Base Part Number | MAX16834 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 28V |
| Power Dissipation | 2.051W |
| Max Supply Current | 10mA |
| Voltage - Output | 27V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 100 |
| Voltage - Supply (Min) | 4.75V |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
MAX16834AUP/V+T Overview
It saves board space with the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package. In LED drivers, the outputs are all set to 1.The mounting method adopted is Surface Mount.As a result, it appears as a DC DC Controller with a high efficiency and a high degree of reliability.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.There are considerable benefits for Automotive, Backlight.A frequency of 100kHz~1MHz is used as the basis for operation.There are 20 terminations associated with it.It is configured with 20 pins as its base.Failures may occur if the voltage supply is below 4.75V.100 segments exist.This LED driver can be found under the base part number MAX16834.27V is the voltage output.In addition, it can also be categorized into Display Drivers based on its characteristics.As long as the maximum supply current is less than 10mA, this device is capable of providing high efficiency.It is necessary to use 28V voltage to power systems.Several applications make use of this LED driver from the Automotive, AEC-Q100 series.
MAX16834AUP/V+T Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 100kHz~1MHz
Supply voltage of 12V
Operating with the supply voltage of 28V
MAX16834AUP/V+T Applications
There are a lot of Maxim Integrated MAX16834AUP/V+T LED Driver ICs applications.
- White LED Backlight for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- OLED power supply for portable equipment
- Portable lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Street lighting
- Down lighting
- LED backlight driver for LCD displays for portable equipment
- High-end retail lighting
- Auxiliary lights for on-vehicle cameras
