MAX16838AUP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.051W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 200kHz~2MHz |
| Base Part Number | MAX16838 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 40V |
| Power Dissipation | 2.051W |
| Output Current | 150mA |
| Max Supply Current | 3.1mA |
| Voltage - Output | 4.75V~5.25V |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 4.75V |
| Max Input Voltage | 40V |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Switching Frequency | 2MHz |
| Voltage - Supply (Min) | 4.55V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX16838AUP+ Overview
20-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space on the board. A LED driver using this design has 2 outputs.Surface Mount is used to mount the led light driver.With high efficiency and reliable performance, it emerges as a DC DC Regulator.This LED driver can be operated at a temperature of -40°C~125°C TJ. Automotive, Backlight has many benefits.Based on the frequency of 200kHz~2MHz, it operates on the basis of a pulse.The operation of this system is supported by 20 terminations.It has a base of 20 pins.If the voltage supply is less than 4.55V, undetermined failures will occur.The number of segments is 2.As you can see, it is mounted by Surface Mount.It can be found under the part number MAX16838.There is 4.75V~5.25V voltage output from it.A total of 20 pins are present on this device.In addition, it can be classified as Display Drivers according to its characteristics.A voltage of 4.75V is its minimal input voltage.Whenever the maximum supply current is allowed, the value reaches 40V.As long as the maximum supply current is under 3.1mA, it can deliver high efficiency.It is possible to supply the load with 150mA current.There is 40V internal voltage required to power systems.Electronic components can function properly when their switching frequency is set to 2MHz.
MAX16838AUP+ Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 200kHz~2MHz
Supply voltage of 12V
Operating with the supply voltage of 40V
Switching frequency of 2MHz
MAX16838AUP+ Applications
There are a lot of Maxim Integrated MAX16838AUP+ LED Driver ICs applications.
- Street lighting
- Down lighting
- General lighting
- Scanners and Handy Terminals
- LED Lightings for Inspection Devices
- Flicker-free LED Lighting using R1580N
- Architectural lighting
- White LED Backlight for portable equipment
- LED Lightings for Industrial Equipment
- Portable lighting
